[SSLance]

Got my first quote for just polishing the concrete floors, two different options.


Scope of Work – Polish

-perform 30 grit diamond grind in order to expose salt and pepper aggregate

-patch minor cracks, joints and spalls using a cementitious repair mortar

-perform 80 grit finish grind

-run 150 grit transitional tooling

-hone concrete with 200 grit diamond impregnated resins

-apply clear penetrating sealer system

-polish concrete with 400 grit diamond impregnated resins

-polish concrete with 800 grit diamond impregnated resins bringing concrete high shine

-NOTES: Entire area is to be done in one mobilization taking 3-4 days during normal, daytime, weekday hours. Entire area is to be free and clear of all equipment, material, debris and other trades. Proper lighting, 110v/20 amp power, 208v/50amp/3-phase power, water and access is to be provided by others.



Price: $3.75 per sq. ft.



Option – Grind and Seal

-perform 30 grit diamond grind in order to expose salt and pepper aggregate

-patch minor cracks, joints and spalls using a cementitious repair mortar

-perform 80 grit finish grind

-apply clear solvent-based acrylic sealer

-NOTES: Entire area is to be done in one mobilization taking 3-4 days during normal, daytime, weekday hours. Entire area is to be free and clear of all equipment, material, debris and other trades. Proper lighting, 110v/20 amp power, 208v/50amp/3-phase power, water and access is to be provided by others.



Price: $2.30 per sq. ft.


Same guy quoted me $3.69 per sq. ft. for a full chip epoxy coat with 3 coats of Polyurea on top for comparison.