[rat_rod_russell]

So as you might have seen in the video the chassis is together and the motor and transmission are both in.



Dad got the radiator should made up to fit out generic Griffin Radiator (188.17 Part # 1-25201-X) The PRC Condenser Core ( 120.00 after shipping, its not on their site so you have to call them about it ), and some cheap summit fans (85.94 Summit Racing Cooling Fans, Quantity 2, Part # SUM-G4901 42.97 Each) I updated all this on the first page for the totals as well for people keeping up with pricing. Made up a few tabs to hold it to the stock core support and not I just need to weld it all up.







Body work continues, he keeps finding "just one more thing"..... I was afraid of this. And so Dad's Down and Dirty just became Dad's Down and Dangerous. We'll see how much longer he keeps up at it but I think its going to end up pretty darn nice when he's finished.




The hard lines are going down and we are getting the turbo system layout worked out as well. Should look something like this but with 2.5" off the headers into a 3" into the turbo. Then 3" out of the turbo into a dual 2.5" out the back.






Things will slow down for a bit while we get the body work wrapped up and we get 2 customer chassis's wrapped up and shipped out.

Later
-Russell @ Nerd Rods