View Single Post
  #2  
Old 08-16-2019, 04:38 PM
CamaroAJ's Avatar
CamaroAJ CamaroAJ is offline
Lateral-g Supporting Member
 
Join Date: Mar 2010
Location: San Antonio, Tx
Posts: 851
Thanks: 102
Thanked 241 Times in 116 Posts
Default

All of the parts will swap. The frame its self was the same from 1997-2013 except the C6 Z06 which was aluminum and had a different mount design for the rear upper control arms. The pick up points are the same they just redesigned the control arms for strength.

The front cradle is will swap between the two and only had minor changes. The rear has a different cradle to accept the auto 6 speed and how they mount with two pads vs. one on the C6. If you swap C6 rear lower control arms onto the C5 it will move the wheels back about 3/4" and center the wheel better in the opening. This was in part to offset the longer 6 speed auto vs. the 4 speed.

The C6 spindles are the same mounting point wise, but are a different aluminum and have thicker brake mounting bosses and overall they were stiffer than the C5. Direct swap between the two models.
__________________
Instagram- camaroaj
Reply With Quote