Quote:
Originally Posted by 67pro-street
I think using this jig and having everything level is going to work out a LOT better than my first attempt where i had everything on jackstands with a shim here, a shim there, a shim everywhere...
And some pics of the bracing and floor removal...
 |
Looking good. I'm assuming you know that the roof panel got whacked about 2" above where it meets the quarters, right? That line of drilled out spot welds on the inner structure below the roof cut is where the quarter attachs, and the roof slips down over it. You may end up putting a new roof skin on if you don't want to have to fab up a 2" wide patch to tie the roof and quarter together- that area has a lot of curve/shape to it and isn't something I'd want to try to make look right with a patch.