First part to not fit well. I'm guessing it's not an AMD part based on the high quality of everything else I've fit so far and it came in a generic box. The passenger side cowl box wasn't close to fitting so I cut a pie out of both sides and filled them.
I also decided to fix the toe board at the bottom of the firewall.
Jumped back to the crossmember and mini-tubs. I started welding in the crossmember now that it fit how I wanted.
Fit the drivers side closeouts to tie everything together on that side as well.
Welded the new trunk dropouts in and finished welding the trunk floor to the crossmember.
Also got the drivers side drip rail on.
|