[redfire69]

Originally Posted by Vince@Meanstreets

The forth gen booster firewall mounts are different. The one to go with are the 2002-2008 corvette units. You may have to redrill the pedal or run a 1/4" spacer between the bracket and booster.

Or you can run the tuff stuff booster part number 2229NC
http://m.summitracing.com/parts/tff-2229nc

Works perfectly with the DSE reduced angle bracket
http://m.summitracing.com/parts/dsr-050302

You will also need the pedal clevis kit
http://m.summitracing.com/parts/sum-760125

Vince, I'm attempting this exact tuff stuff setup above on a former manual brake 69 Camaro. It looks like I'm getting interference with the booster hard rubber boot and firewall in the last inch of trying to bolt this up. Any ideas on this issue? Do I just tighten it down, or clearance the firewall hole, or ...? Thanks in advance. Ron