Quote:
Originally Posted by Che70velle
I've had this problem recently. I was getting the very fine bubbles with my vacuum bleeder. I removed the bleeders from the caliper, and put red wheel bearing grease on the threads of the bleeders liberally. I did this at each corner, and had a perfect pedal in 45 minutes. The ultra fine bubbles were coming from the bleeder screws threads. I went and purchased a new vacuum bleeder during the process, thinking I had an issue with the bleeder. Just about drove me crazy...
|
Thanks I am seeing that in the rear calibers but the fronts have no air at all. The calibers move each time we pump the brakes but just no bit and the pedal is sift