Quote:
Originally Posted by Spiffav8
I don't have any photos for you, but the RS setup I installed in mine was pretty simple and straight forward. Took all of about 20 min.
|
At the beginning I was having some difficulties to center and align the LED board within light housing due to smaller size boards compared to the previous design, but yesterday I got it all figured out.
However, when I wired up the parking lights, the little green indicators for the turn signals/hazard on the classic instruments cluster come on and stay on when the parking light is turned on. When I turn the hazards or the turn signals on, the dash indicators blink at a higher intensity like the parking lights. It is strange.
I did replace both the flashers with LED flashers and not sure why this is happening.
This phenomena happened just when I had installed Digi-Tails parking lights.