Thanks Donny, a friend has an extra one in his tool box that matches the other so it won't cost anything. David explains that even the 3/8s nipple on these might even be too much air and I may want to slow the air down going in the fresh air side. My logical mind say's it'll only pull in the fresh side the amount of air (minus any blow by) the PVC side pulls out of the can by which will be 3/8s as well.
The big thing to me is the 1" stub that goes in the grommet so that is a tight fit. I'm just happy I don't have to cut on or weld to my valve covers...
__________________
Lance
1985 Monte Carlo SS Street Car
|