Quote:
Originally Posted by TheJDMan
When I twist off the head of a bolt the most effective way I have found to remove the remaining thread is to weld a nut on the end of the broken off bolt. The bolt can then be removed with a normal wrench and the heat normally helps loosen the threads.
Great thread BTW!
|
This also works well for removing stubborn bellhousing dowel pins you aren't reusing. Weld a bolt on to the end of the dowel pin with the threads facing out, use a piece of pipe with a washer that allows the threads to stick out. Antiseize the threads and put a nut on... tighten with impact gun and the dowel pin will pop right out.