View Single Post
  #6  
Old 03-14-2018, 09:50 AM
csdilligaf csdilligaf is offline
Junior Member
 
Join Date: Dec 2016
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Well I have been playing with the Suspension analyzer and think I can attach the file. If you have Suspension analyzer please try to open it. I was able to click "File" "Save as" "Advanced" and pick a location outside of Suspension Analyzer and save it. Then I was able to open Suspension Analyzer click "File" "Open from floppy drive" and locate the file and open it again. I guess they just never bothered to change the language. I have not had a floppy drive for 20 years. Also I have no idea of the exported file's type but was able to put it in a zip folder to post it here.
So, please if you can open this do so and see if it works. Keep in mind that I am new to the program and this is just a rough start. There are lots of info to be corrected still but I am trying to nail down the basics of the front suspension.
I have read that for a car like this I may want to account for 1" lift and dive and 2 degrees roll for the calculations. Does this sound about right?
Attached Files
File Type: zip Rev2.zip (756 Bytes, 0 views)
Reply With Quote