View Single Post
  #446  
Old 04-09-2018, 07:52 PM
longhornss longhornss is offline
Junior Member
 
Join Date: Apr 2015
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by vannatta20 View Post
A 5th gen camaro e38 os will not support pwm. But a truck e38 os will. Also the e92 silverado controller will only support pwm at 100hertz. No discrete on the new stuff factory os.. The gmpp e92 controller will support discrete only. Its all super confusing and testing is the only way to know for sure. Lot of misinformation out there. I use an oscilloscope at work to see the signals. To get ac control the computer needs to get a serial on request from the bcm. We have a module the sends that signal along with tap shift commands for gen iv and gen v. This control the fan based on ac pressure as well. Works perfectly.
So I would like to run 2 spal brushless fans on my C10 build running an E92. I currently have A GMPP kit.
So with all this, it looks like need to track down a Silverado ECM and transfer the program from my GMPP controller?
Reply With Quote