I would say my car is possessed because it never gets done��
My bad guys, it was dark when I took the voltage measurements and did not realize I was measuring AC voltage. That is why you saw such magical numbers.
Anyways, I did measure again and this time it is correct DC voltage:
-Engine not running, parking lights ON, LED side markers installed:
*voltage at parking light wire is around 11.9V
*voltage at blinker wire is around 5.9V
-Engine running, parking light ON, LED side markers installed:
*voltage at parking light wire is around 13.00V
*voltage at blinker wire is around 6.8V
Engine running, parking lights On, LED side markers removed:
*voltage at parking light wire is around 13.6V
*voltage at blinker wire is 0V
Earlier I was confused about why the 4 way flashers (front & rear) freeze when I apply the brakes. However, it seems to be normal as per the feedback from forum members.
I did run a ground wire from battery negative terminal to Digitails ground wire but no luck.
I hope this time it is clear now for you guys to guide me more on this issue
Sorry for the voltage confusion.
__________________
72 Camaro RS:SOLD
68 Camaro:
LS6 Engine,Tremec TKO 600,5 Speed
Complete Speedtech Subframe Kit,Speedtech Torque Arm, 9" Rearend from Strange, Wilwood Brakes, Minitubbed, Hotchkis Subframe Connectors, FIKSE FM5s
Last edited by 72Z/28; 04-30-2019 at 11:46 PM.
|