View Single Post
  #19  
Old 02-02-2014, 11:38 AM
67Rally's Avatar
67Rally 67Rally is offline
Senior Member
 
Join Date: Oct 2010
Posts: 137
Thanks: 0
Thanked 1 Time in 1 Post
Default

I still need to see if I want to connect the loop to my subframe connectors or run it straight back off the transmission mount.

But, if I ran it straight back from the trans mount, would the NHRA view two 1.5"x1/4" pieces of steel running parallel, but not connected to each other as good as one 2"x1/4" piece of steel. The ONLY reason I ask is that I already have some 1.5"x1/4" steel stock lying around. The loop itself would be 2"x1/4", and the plate that bolts to the trans would be something like 4"x3"x1/4"

Forgive my Microsoft Paint sketch. If I run a DS loop off the trans mount, this would be a top view with the transmission on the left of the picture. The DS would pass through the loop and out to the right.

Reply With Quote