View Single Post
  #18  
Old 02-22-2014, 10:35 AM
ccracin's Avatar
ccracin ccracin is offline
Senior Member
 
Join Date: Sep 2006
Location: Rostraver, PA
Posts: 2,067
Thanks: 0
Thanked 4 Times in 4 Posts
Default

Ron,

Let's start with the distributor. There is no distributor rule per say, but there is a rule that does not allow electronic timing control or retard boxes. That's why I said I didn't believe the E-Curve dizzy would be allowed. I understand the goal here and will help them come up with a solution that best fits the budget.

With regard to the exhaust, here is what they have. The headers are Shoenfeld stepped but are not crossovers. They are 1 5/8" primary tubes stepped to 1 3/4". The 1 5/8" tubes are 16" long with a total tube length of 38 1/2". They have standard 4 into one 3" collector about 8" long then into the Sheonfeld slip on mufflers. They are 3' in and out with 3 1/2" bodies. They are mounted right to the end of the collectors.

Thoughts?

Thanks!
__________________
Chad
Instagram - @cctek
https://https://www.facebook.com/CCTek

68 Chevy Pickup Project
Build Thread: https://lateral-g.net/forums/showthread.php4?t=7505

THANKS TO: A&M Machine and Fabrication, CCTek (http://www.candctek.com), Hermance Design(www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Wegner Automotive Research, Clayton Machine Works
Reply With Quote