View Single Post
Old 02-24-2012, 08:08 PM
rwhite692's Avatar
rwhite692 rwhite692 is offline
Lateral-g Supporting Member
Join Date: Sep 2004
Location: Tracy, CA
Posts: 1,909
Thanks: 0
Thanked 0 Times in 0 Posts

Originally Posted by GregWeld View Post
Rob --

The only thing I see that I "don't like" about this set up is media changing...

My TP Tools cabinet has a nice spring loaded trap door that drops the media out of the hopper... and you've used this "area" to attach your pick up to. So how do you change out the media???
GW if you look at the pic, on the very bottom of the Venturi assembly you can see a white PVC plug threaded in (1" NPT) you just unscrew that plug and all the media drops straight down/out.

I leave the cap off with a bucket under there and shoot the inside of the cabinet with a few blasts of air to get the last bits of media all out.

My previous cabinet also used a spring loaded trap door, which works fine as well.
1969 Camaro/ Tom Nelson TT 434 / Wayne Due C5 / DSE QLink / and a bunch of other stuff...

Project update thread here:

My Lateral-G Page

My Shop Build:
Reply With Quote