View Single Post
  #6  
Old 08-10-2014, 09:13 AM
Rick D's Avatar
Rick D Rick D is offline
Senior Member
 
Join Date: Jun 2005
Location: Third Rock From the Sun!! 😃
Posts: 3,369
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by Sieg View Post
Sounds like the driveline angles may have been off? First I've heard of one breaking. What's hard to know with anyones components is the integrity of the installation.

^^^What Sieg said, there are quite a few running the TA setups on here and I haven't heard of that. Most likely it was installed incorrectly?? Remember the TA arm is nothing new, GM has been running it for years!!

As for which setup to go with, both have pros and cons, pros both are proven on the track ALOT, depending on budget that could be a con, the TA setup cost more then the RideTech setup. Packaging is another thing to think about?? Both require some welding skills or you have to have it welded.

If I change out my leafs I think I'm going with the RideTech setup, or I will make my own 4 link Vince???
__________________
Rick

[SIGPIC]https://neversaynever0304.files.wordpress.com/2014/07/you-didnt-see-anything.gif[/SIGPIC]
Reply With Quote