Quote:
Originally Posted by Oleyellar
I have the best luck with vacuum. Seal the top of the reservoir, I use a fender washer with some rubber gasket material glued to it, use a Mighty Vac to pull a vacuum on the system, let it sit for a few minutes and all the air comes to the surface in the reservoir. Top it off and be done.
|
I had the same thing on my 67 Nova. Applied vacuum to the reservoir, and after a little bit, it pulled the rest of the air from (what I assume) was the top of the master. If your master is tilted down somewhat, it appears to me there is some room for air at the very top.
Prior to that, I bled more than a pint through the slave, once the original bubbles were out, the pedal still sucked.
Tim