View Single Post
  #5  
Old 01-29-2019, 10:31 AM
rickpaw rickpaw is offline
Lateral-g Supporting Member
 
Join Date: Jan 2010
Location: Houston, Tx
Posts: 881
Thanks: 16
Thanked 17 Times in 16 Posts
Default

Quote:
Originally Posted by gnx7 View Post
In all the T56, T56 Magnum (TR6060) conversions I do we run a 7/8" bore MC.

I have also found that the slaves once depressurized have a high likelihood of failure.... meaning I never install a used one unless it is 6 months old.

Start with the MC replacement and if the new one that doesn't leak works... run it. If not... replace the slave also.
The McLeod m/c adapter uses a wilwood 3/4" m/c that been modified to fit their bracket, so I have to stick with 3/4" for now.

Yeah, I should have replaced the slave when I was putting it together. But I was over budget, so was trying to save $$. Good thing it's only my time.

So I replaced the m/c, no change. So dropping the trans and replace the slave is next.
__________________
Tu Ho
67 Firebird (aka "Money Pit")-5.3/4l60e, restomod.
https://lateral-g.net/forums/showthread.php4?t=43170
Reply With Quote