...

Go Back   Lateral-g Forums > Technical Discussions > Transmission and Rear End
User Name
Password



Reply
Thread Tools Display Modes
  #1  
Unread 03-07-2016, 11:06 PM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default MillerBuilt's WELD-ON C6/7 Hybrid Floater System

C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:

  • Welds to your new OR existing housing
  • Reduces/eliminates brake “knockback”
  • Eliminates axle deflection
  • Wheel & tire remains intact should an axle failure occur
  • Front or Rear Caliper / E-Brake Cable Positions
  • Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
  • Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
  • Super compact design compared to traditional style full floaters
  • All advantages of a traditional style full floater without the maintenance
  • Replacement parts available at local GM dealer or local parts house
  • No modifications required to the hub bearing unit as other kits in the marketplace

Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)

Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.



Questions welcomed!

Last edited by MillerBuilt : 02-22-2017 at 09:19 PM. Reason: Updated Info & Price Adjustments
Reply With Quote
  #2  
Unread 08-06-2016, 12:53 PM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default FREE Shipping & PayPal This Weekend!!

FREE Shipping & PayPal This Weekend!! (8/6/16 & 8/7/16 - "lower 48" states only)
Reply With Quote
  #3  
Unread 10-01-2016, 04:43 PM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default October Special!

FREE Shipping & PayPal through October!! ("lower 48" only)



Quote:
Originally Posted by MillerBuilt View Post
C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:

  • Welds to your new OR existing housing
  • Reduces/eliminates brake “knockback”
  • Eliminates axle deflection
  • Wheel & tire remains intact should an axle failure occur
  • Front or Rear Caliper / E-Brake Cable Positions
  • Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
  • Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
  • Super compact design compared to traditional style full floaters
  • All advantages of a traditional style full floater without the maintenance
  • Replacement parts available at local GM dealer or local parts house
  • No modifications required to the hub bearing unit as other kits in the marketplace

Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)

Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.



Questions welcomed!

Last edited by MillerBuilt : 02-22-2017 at 09:20 PM. Reason: e-brake price increase
Reply With Quote
  #4  
Unread 10-06-2016, 10:16 PM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default

Quote:
Originally Posted by MillerBuilt View Post
FREE Shipping & PayPal through October!! ("lower 48" only)
This........ (floater ends)


Gets you to this..... (complete hybrid full floater system)






Housings can be supplied as well for a complete solution......

Thanks for looking!
Reply With Quote
  #5  
Unread 10-19-2016, 08:41 AM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default

Quote:
Originally Posted by MillerBuilt View Post
C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:

  • Welds to your new OR existing housing
  • Reduces/eliminates brake “knockback”
  • Eliminates axle deflection
  • Wheel & tire remains intact should an axle failure occur
  • Front or Rear Caliper / E-Brake Cable Positions
  • Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
  • Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
  • Super compact design compared to traditional style full floaters
  • All advantages of a traditional style full floater without the maintenance
  • Replacement parts available at local GM dealer or local parts house
  • No modifications required to the hub bearing unit as other kits in the marketplace

Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)

Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.



Questions welcomed!
Quote:
Originally Posted by MillerBuilt View Post
This........ (floater ends)


Gets you to this..... (complete hybrid full floater system)






Housings can be supplied as well for a complete solution......

Thanks for looking!

In Stock!
__________________
MillerBuilt LLC
Mesa, AZ

Jay@MillerBuiltusa.com
www.MillerBuiltusa.com


Last edited by MillerBuilt : 02-22-2017 at 09:22 PM. Reason: e-brake price increase
Reply With Quote
  #6  
Unread 02-09-2017, 09:49 PM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default

Quote:
Originally Posted by MillerBuilt View Post
C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:

  • Welds to your new OR existing housing
  • Reduces/eliminates brake “knockback”
  • Eliminates axle deflection
  • Wheel & tire remains intact should an axle failure occur
  • Front or Rear Caliper / E-Brake Cable Positions
  • Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
  • Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
  • Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
  • Super compact design compared to traditional style full floaters
  • All advantages of a traditional style full floater without the maintenance
  • Replacement parts available at local GM dealer or local parts house
  • No modifications required to the hub bearing unit as other kits in the marketplace

Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)

Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.



Questions welcomed!
Quote:
Originally Posted by MillerBuilt View Post
This........ (floater ends)


Gets you to this..... (complete hybrid full floater system)






Housings can be supplied as well for a complete solution......

Thanks for looking!

In Stock!
__________________
MillerBuilt LLC
Mesa, AZ

Jay@MillerBuiltusa.com
www.MillerBuiltusa.com


Last edited by MillerBuilt : 02-22-2017 at 09:23 PM. Reason: e-brake price increase
Reply With Quote
  #7  
Unread 06-05-2017, 08:18 PM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default In Stock

In Stock
__________________
MillerBuilt LLC
Mesa, AZ

Jay@MillerBuiltusa.com
www.MillerBuiltusa.com

Reply With Quote
  #8  
Unread 09-02-2017, 08:42 PM
MillerBuilt's Avatar
MillerBuilt MillerBuilt is offline
Lateral-g Supporting Member
 
Join Date: Sep 2011
Location: AZ
Posts: 422
Default Customer Ride

Recently received a few orders from Donny over at Frame Up Wheel Works. Donny/Frame Up is out of Beach Park, IL. Donny's builds speak for themselves and I am thrilled to have him on board with the MillerBuilt Full Floaters!

Donny is well versed in what it takes to properly fixture the MillerBuilt Weld-On Full Floater. Donny felt the MillerBuilt Hybrid Full Floater System was the best solution for what he was looking to accomplish. Per Donny,,,,, mission accomplished!

Below is the beautiful 69' that one of the MillerBuilt kits sits under. The car frequents both Auto-X and Open Track Days....

__________________
MillerBuilt LLC
Mesa, AZ

Jay@MillerBuiltusa.com
www.MillerBuiltusa.com


Last edited by MillerBuilt : 09-03-2017 at 10:47 PM.
Reply With Quote
  #9  
Unread 09-04-2017, 08:04 AM
dontlifttoshift's Avatar
dontlifttoshift dontlifttoshift is offline
Senior Member
 
Join Date: Oct 2012
Location: Beach Park. IL
Posts: 690
Default

Thanks Jay!!

Here is another that we did.




Using the long snout weld on kit, I was able to widen the rear end so that I could run a square wheel and tire setup helping our consumables last longer.
__________________
Donny

Support your local hot rod shop!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:52 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright Lateral-g.net