...

Go Back   Lateral-g Forums > Technical Discussions > Trucks
User Name
Password



Reply
 
Thread Tools Display Modes
  #11  
Old 10-17-2013, 03:00 PM
Musclerodz's Avatar
Musclerodz Musclerodz is offline
Senior Member
 
Join Date: Nov 2004
Location: washington, ok
Posts: 4,273
Thanks: 22
Thanked 159 Times in 93 Posts
Default

got the dse kit in. although the factory motors are the same, the way the dse motors are done, the swap is not as straight foward due to the way the motor is mounted in the trucks. I will work on a fix and see what I come up with.
__________________
Mike Redpath
Musclerodz & Customz
facebook page
Reply With Quote
  #12  
Old 10-17-2013, 03:44 PM
68LS1's Avatar
68LS1 68LS1 is offline
Lateral-g Supporting Member
 
Join Date: Nov 2004
Location: Melbourne, Australia
Posts: 360
Thanks: 44
Thanked 26 Times in 15 Posts
Default

Quote:
Originally Posted by Musclerodz View Post
got the dse kit in. although the factory motors are the same, the way the dse motors are done, the swap is not as straight foward due to the way the motor is mounted in the trucks. I will work on a fix and see what I come up with.
Thanks again for update
__________________
Roger

68 RS Camaro Convertible LS1 6 speed
72 C10 SWB Stepside, old skool 350 4L60e
71 K5 Blazer 350sbc T350
Reply With Quote
  #13  
Old 10-17-2013, 03:48 PM
68LS1's Avatar
68LS1 68LS1 is offline
Lateral-g Supporting Member
 
Join Date: Nov 2004
Location: Melbourne, Australia
Posts: 360
Thanks: 44
Thanked 26 Times in 15 Posts
Default

Quote:
Originally Posted by tech@scotts View Post
We've installed several of the Specialty Power Window Wiper Universal kits in C-10's. Right now we're installing on in the Goodguys Giveaway C-10 that we're building. We're having a sale in the vendors marketplace, but look here for pics of the kit. Just throwing it out there as another option if you're interested.

https://lateral-g.net/forums/showthread.php4?t=43348
Thanks, will see how Mike goes with the DSE kit

Is the Specialty Power Window Wiper Universal kits only 2 speed no intermittent/delay?
__________________
Roger

68 RS Camaro Convertible LS1 6 speed
72 C10 SWB Stepside, old skool 350 4L60e
71 K5 Blazer 350sbc T350
Reply With Quote
  #14  
Old 10-17-2013, 06:06 PM
Scotts Hotrods Scotts Hotrods is offline
Supporting Vendor
 
Join Date: Nov 2008
Posts: 29
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by 68LS1 View Post
Thanks, will see how Mike goes with the DSE kit

Is the Specialty Power Window Wiper Universal kits only 2 speed no intermittent/delay?
The specialty power window wiper kit has a 2 sp and intermittent switch.This kit is made in the USA.Like stated before it is a option to what Mike is offering.
I will say one thing we have sold more 100 of theses kits and they will work perfect and are a great fit in a c-10 truck.We do build alot of C-10s in our shop
Reply With Quote
  #15  
Old 04-27-2015, 07:54 PM
longhornss longhornss is offline
Junior Member
 
Join Date: Apr 2015
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

This is an old post I know but was there ever any resolve on the Detroit speed install?
Reply With Quote
  #16  
Old 08-26-2015, 06:04 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Just finished installing a DSE Selecta-speed wiper kit in our 67 c10. I started with a 67 camaro kit. They do have a universal kit but they were on back order and we found this one in stock from a dealer. It can't be a "bolt in" since the stock bracket must be removed, but wasn't very difficult. It took about 3 hours to do.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #17  
Old 08-26-2015, 06:06 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

First the stock mounting bracket had to be removed by drilling the 6 spot welds
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #18  
Old 08-26-2015, 06:07 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Bracket is out of the way
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #19  
Old 08-26-2015, 06:10 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Using the 67 camaro bracket as a template, it was cut to fit. The edge on the left fit perfectly vertical with the motor mounted at an angle out of the way with no interference.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #20  
Old 08-26-2015, 06:14 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

1/8" steel plate was used. This gives the right spacing for the shaft to protrude thru the cowl. The shaft hole is slightly smaller than the DSE plate to seal around the rubber grommet.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net