|
07-21-2017, 12:43 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Jan 2007
Location: South Side Chicago
Posts: 2,894
Thanks: 7
Thanked 64 Times in 40 Posts
|
|
Brakes not stopping very good !!
Well guys I'm on to the next problem . I'm not happy with the way my car brakes . I have the complete ZR-1 Brembo / Carbon Ceramic set up on my car. 7/8 bore manual master . The pedal seems very soft . If yo have to panic stop it ain't happening. No matter how hard you press the pedal you can not get the brakes to lock up. There is no air in the lines I checked for that . Wondering if anyone has any suggestions.
__________________
Mario
USCOLLISION
|
07-21-2017, 02:42 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Feb 2008
Location: Eads, TN.
Posts: 1,408
Thanks: 303
Thanked 143 Times in 99 Posts
|
|
I thought I read on here somewhere that they (carbons) have to have a good bit of heat in them to work well... but I don't remember anybody saying they had to have heat to work period.
__________________
You remind me of the timing on a turbo engine...
|
07-21-2017, 02:45 PM
|
|
Senior Member
|
|
Join Date: Dec 2006
Posts: 8,663
Thanks: 86
Thanked 210 Times in 119 Posts
|
|
It sounds like you may have air in your master cylinder. It may need re bench bleed. I personally never liked the 7/8 due to more pedal travel. I always thought a 15/16 would be perfect and I think they make it now. I ended up with a 1" on mine and preferred it over the 7/8. It was a higher firm pedal. It did take some leg.
Assuming your caliper pistons and master cylinder have been calculated correctly.
__________________
Todd
|
07-21-2017, 04:52 PM
|
|
Senior Member
|
|
Join Date: Nov 2004
Location: washington, ok
Posts: 4,273
Thanks: 22
Thanked 159 Times in 93 Posts
|
|
Does it have a wilwood master on it? There is a recall on 7/8 bore masters.
__________________
Mike Redpath
Musclerodz & Customz
facebook page
|
07-21-2017, 05:46 PM
|
|
Lateral-g Supporting Member
|
|
Join Date: Jan 2007
Location: South Side Chicago
Posts: 2,894
Thanks: 7
Thanked 64 Times in 40 Posts
|
|
Quote:
Originally Posted by Ketzer
I thought I read on here somewhere that they (carbons) have to have a good bit of heat in them to work well... but I don't remember anybody saying they had to have heat to work period.
|
I thought so to but I've put plenty of heat on them and still the same.
Quote:
Originally Posted by Vegas69
It sounds like you may have air in your master cylinder. It may need re bench bleed. I personally never liked the 7/8 due to more pedal travel. I always thought a 15/16 would be perfect and I think they make it now. I ended up with a 1" on mine and preferred it over the 7/8. It was a higher firm pedal. It did take some leg.
Assuming your caliper pistons and master cylinder have been calculated correctly.
|
I will look into that Todd Thanx
Quote:
Originally Posted by Musclerodz
Does it have a wilwood master on it? There is a recall on 7/8 bore masters.
|
Chrysler!!!
__________________
Mario
USCOLLISION
|
07-21-2017, 07:00 PM
|
|
Senior Member
|
|
Join Date: Jan 2008
Location: Orlando, FL
Posts: 1,300
Thanks: 155
Thanked 117 Times in 69 Posts
|
|
Quote:
Originally Posted by Vegas69
It sounds like you may have air in your master cylinder. It may need re bench bleed. I personally never liked the 7/8 due to more pedal travel. I always thought a 15/16 would be perfect and I think they make it now. I ended up with a 1" on mine and preferred it over the 7/8. It was a higher firm pedal. It did take some leg.
Assuming your caliper pistons and master cylinder have been calculated correctly.
|
I've the got Wilwood 1" on mine too. Locks up all four and emits white smoke when needed. Great pedal feel.
__________________
Ty Ingle, USAF Retired
FREEDOMBIRD Hoodpins.com, Inland Empire Driveline, Billet Accessories Direct, Modo Innovations, AutoRad Radiators, Morris Classic Concepts, Marquez Design, Anvil Auto, Fesler Billet, US Collision (DOOM), AGR, Pro-touringF-body.com, Phoenix Transmission Products, Shiftworks, ACC Carpet, Hedman Hedders, BMR Fabrication, American Autowire, MityMounts, TIN INDIAN Performance, Kauffman Racing Equipment, Pypes, RobbMc Performance, WMC, Holley, NOS, PST
|
07-21-2017, 09:38 PM
|
|
Lateral-g Moderator
|
|
Join Date: Apr 2007
Location: Las Vegas, NV
Posts: 4,716
Thanks: 548
Thanked 444 Times in 209 Posts
|
|
Are you able to push the pedal all the way to the floor? Perhaps you need to move the seat forward or a put pillow behind you to help those short legs reach the pedal. You can always go old school and tape a block to the pedal.
|
The Following User Says Thank You to Spiffav8 For This Useful Post:
|
|
07-22-2017, 01:11 AM
|
Lateral-g Supporting Member
|
|
Join Date: Nov 2008
Location: Phoenix, AZ
Posts: 738
Thanks: 10
Thanked 55 Times in 35 Posts
|
|
What are the specs on the factory ZR1 master? It stops just fine with little heat in the rotors. From what I understand, there's nothing magic about the CC stuff until you get into ABS programming, which isn't an issue here. I'd expect with a proper master you should have good brakes with the possible downside being that they'll get grabby and prone to locking up when you get them good and warm. Opposite of the issue you're having.
Edit: just realized the lack of power assist will make that comparison to the factory part less meaningful. Maybe Tobin with Kore3 can assist, he's good with the math stuff
__________________
Jeff: Project "Rolling Mockup" 69 Camaro SS, AFX, TKO600, Baer GT, etc
Last edited by JKnight; 07-22-2017 at 01:16 AM.
|
07-22-2017, 08:23 AM
|
|
Lateral-g Supporting Member
|
|
Join Date: Jan 2007
Location: South Side Chicago
Posts: 2,894
Thanks: 7
Thanked 64 Times in 40 Posts
|
|
Quote:
Originally Posted by Spiffav8
Are you able to push the pedal all the way to the floor? Perhaps you need to move the seat forward or a put pillow behind you to help those short legs reach the pedal. You can always go old school and tape a block to the pedal.
|
Look at your Avitar!
__________________
Mario
USCOLLISION
|
The Following User Says Thank You to DOOM For This Useful Post:
|
|
07-22-2017, 09:47 AM
|
|
Senior Member
|
|
Join Date: Nov 2004
Location: washington, ok
Posts: 4,273
Thanks: 22
Thanked 159 Times in 93 Posts
|
|
Personally I would put power brakes on it, but thats just me. Sometimes safety/function should outway form, or make it a focal point. Most the manual brakes setups I have done (customer request) I am rarely happy with the outcome.
__________________
Mike Redpath
Musclerodz & Customz
facebook page
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 09:23 PM.
|