70 fbody lightening
I wanted to know how significant the side metal
is from the back of the door to the wheel tubs inside
I see a lot of you have changed out the wheel tubs
and it almost looks like some or all of the side metal
was removed... looking a cutting some weight out of
the car. I have a 5 point roll bar that connects to my
subframe connectors below and wheel tubs.
I also have a ridetech 4 link and have braced things up
for that along with a bar installed between the wheel tubs
Otherwise I might just hole punch this
area.. I could dimple die it if there is a concern for strength
The Cars sole purpose in life is to be an autocrosser
Some street time but little
thank you,
Bob --Panteracer and Dreamin Tas
|