1st gen kicks I made

[minendrews68]

I've got the same kicks. Just put them in my '68 Camaro. Look great and installation wasn't a problem at all. Fit was great! Well, I say that the only installation problem I had was getting my old rear end up and down to put them in... I really like mine! Thanks Dennis!

[1976camaroguy]

Originally Posted by minendrews68

I've got the same kicks. Just put them in my '68 Camaro. Look great and installation wasn't a problem at all. Fit was great! Well, I say that the only installation problem I had was getting my old rear end up and down to put them in... I really like mine! Thanks Dennis!

I have a question to anyone that is familiar with all the year 1st gens.

Is there any difference between 67 - 68 and 69 in that area that I might need to be aware of?

Maybe the locations of the fresh air cut out in the metal or parking brake assy?

Any ideas on the differences between a 67-68 and 69 stock kick panel?

[Nativefx]

Did you ever find out if there is a difference in the 69 kick panel area? Are you selling these kick panels as I'm currently looking for option, but of course for a 69 Firebird (which i'm hoping is at least the same as a 69 camaro).

[1976camaroguy]

Originally Posted by Nativefx

Did you ever find out if there is a difference in the 69 kick panel area? Are you selling these kick panels as I'm currently looking for option, but of course for a 69 Firebird (which i'm hoping is at least the same as a 69 camaro).

Yeah there's a little difference at the top of the kick that will need to be trimmed a bit and depending on the size of the speaker and wiggle room of the kick you might have to trim a little off the metal behind it.

Not doing any more at moment, but when the temps break a bit and it makes it more bearable weather - wise I might make some more.

If I do I will put on eBay, here's my feedback page and you can check my items FS if I have any.

http://www.ebay.com/usr/1971camaroguy

[Swain]

Do you have any kick panels with the mesh and holes cut out?

Originally Posted by 1976camaroguy

Too proud of them not to show off

[1976camaroguy]

Originally Posted by Swain

Do you have any kick panels with the mesh and holes cut out?

No sorry, that was a one time thing to show what they look like finished. Only selling them unfinished.