...

Go Back   Lateral-g Forums > Technical Discussions > Transmission and Rear End
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 05-05-2020, 08:21 AM
Sparkplug Sparkplug is offline
Junior Member
 
Join Date: Jun 2018
Posts: 8
Thanks: 1
Thanked 1 Time in 1 Post
Default 1st Gen Clutch Pedal Geometry (4th Gen) Template or Measurement info..?

Hi,

I am just in the process of adapting the 1st Gen Camaro clutch pedal to incorporate the 4th Gen Geomrety. I am in the UK so its not as easy as going to salvage a 4th gen clutch pedal and just getting on with it. So I am reaching out to see if any of you guys that have done the modification have made a CAD template that you could share OR even a simple datum point set of measurements I could use to save me having to ship a used 4th Gen pedal over to the UK...ball ache I know.

It is the simple tab attachment to the 1st Gen pedal, to give correct stroke & alignment to use Dorman Master Cylinder (CM350014) when using a T56 or similar, just like Mark Stielow has explained a couple times on his recent '69 build threads here. (LT5 Project thread, post #101 for reference)

In the meantime I have posted a thread in the correct section for said pedal just incase I need to buy one and ship it.

Thanks, appreciate it if anyone comes forward to help me out.

Jake.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net