...

Go Back   Lateral-g Forums > Technical Discussions > Engine
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2018, 09:09 PM
randy randy is offline
Senior Member
 
Join Date: Jan 2011
Posts: 886
Thanks: 1
Thanked 2 Times in 2 Posts
Default TSP Stage 2 N/A LS3 229/244, .629/.615, 112 or 111 LSA Camshaft

Any thoughts on this cam? its about time i upgrade the hotcam out of my ls3. My cam currently runs amazing but i want to add some more power and RPMs into the mix. What difference should i see with a 111 vs 112 lsa? Any reason to go with the one over the other?
Reply With Quote
  #2  
Old 10-13-2018, 11:36 AM
Z06vette's Avatar
Z06vette Z06vette is offline
Senior Member
 
Join Date: Nov 2006
Location: Pensacola, FL
Posts: 445
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I use it on the 112.(i actually prefer the old specs 229/236, i like the torque retention over the 244) 111 will shift the power band down slightly, a tad rougher idle. I have used this 3 in 3 different LS3's. My current setup (229/236 112) made 448rwhp thru a tremec 6 spd, 9" w4.11s on very humid hot day. The 236/244 probably make 10-15 more peak hp.
__________________
69 RS LS3/T56
68 firebird vert LS1/4L60E
67 RS LS2/T56
Reply With Quote
  #3  
Old 10-13-2018, 09:40 PM
randy randy is offline
Senior Member
 
Join Date: Jan 2011
Posts: 886
Thanks: 1
Thanked 2 Times in 2 Posts
Default

4 hrs into it the trunnions are upgraded and the cam is about to be pulled out. Just need to pull it tomorrow and resinstall. After that upgrade the valve springs and put the rest back together. Guessing all said and done Iíll have a total of about 10 hrs into it
Reply With Quote
  #4  
Old 10-13-2018, 09:49 PM
dhutton dhutton is online now
Senior Member
 
Join Date: Nov 2006
Location: Mountain Springs, Texas
Posts: 1,363
Thanks: 43
Thanked 22 Times in 15 Posts
Default

Quote:
Originally Posted by randy View Post
4 hrs into it the trunnions are upgraded and the cam is about to be pulled out. Just need to pull it tomorrow and resinstall. After that upgrade the valve springs and put the rest back together. Guessing all said and done Iíll have a total of about 10 hrs into it
Are you going to check the PTV clearance? Thatís considerably more lift than the original cam. Or does TSP guarantee no issue?

Don
Reply With Quote
  #5  
Old 10-16-2018, 07:10 PM
randy randy is offline
Senior Member
 
Join Date: Jan 2011
Posts: 886
Thanks: 1
Thanked 2 Times in 2 Posts
Default

They state thereís no issue. Install went easy. Tune in 3 weeks
Reply With Quote
  #6  
Old 11-15-2018, 07:41 PM
randy randy is offline
Senior Member
 
Join Date: Jan 2011
Posts: 886
Thanks: 1
Thanked 2 Times in 2 Posts
Default

For those wondering the difference. The hotcam dynoed higher than the location I had the tsp cam dynoed. Car rips with the new package

https://www.facebook.com/48502792/po...1688281926766/
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:19 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright Lateral-g.net