...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 01-17-2014, 07:53 PM
Finch Finch is offline
Senior Member
 
Join Date: Jul 2009
Posts: 132
Thanks: 0
Thanked 0 Times in 0 Posts
Default Finch Performance Parts

Mods, please move this as needed

As some of you may know I have started to develop a line of parts that will be branded under my new company Finch Performance. There are several parts in the works as I write this, but I wanted to post up a few that are available now. All of these parts have been developed from a need that I found while working on my own car or customer cars. This is not something I am doing to try and retire on, so will not be giving up the day job anytime soon. These are just great parts that fill a niche with the goal being to continue to build the Finch brand beyond the TV personality and racing stuff.

The newest part is a Billet Shifter Ring and Boot assembly. These are machined from billet aluminum and come with a laser cut weld in mounting ring to trim out your transmission tunnel, a custom sewn boot, and stainless button head screws. These are available in 3 finish options. Kits are oversized to fix the common issue of a mutilated shifter opening caused by 30 plus years of sheet metal screws and are large enough to allow the removal of most 4,5,& 6 speed shifter assemblies, including the extra large T56 Magnum, from inside the vehicle to aid in transmission removal.

Introductory price on these is $195 for the Kit plus shipping.



The Finch Billet dual chambered vent canister has been out for a while now and several of you on here have purchased them. These are cut from solid billet and allow the venting of both your rear axle and your fuel tank in the same unit. The chambers are sealed from each other to prevent cross contamination and come with a laser cut drill template to aid in installation. These are designed to mount on your trunk floor and they vent under the vehicle so no worries on fuel smells inside the vehicle.

These sell for $219 each plus shipping



Next up are Toe Plates to make checking and setting your toe at the track or your garage easy and a one man job. These are designed so that they will set against the wheel on their own and have a cutout at the bottom to accommodate the bulge from where the tire makes contact on the surface. This slight bulge can cause inaccurate measurements when using the common flat toe plate.

These sell for $95 a pair plus shipping



Coming soon are Finch rear spoilers for 63 to 67 Novas and 70 to 73 Camaros as well as lower quarter panel diffusers for a complete rear aero package, a complete lower dash cap assembly for 2nd gen Camaros that will let you run billet vent registers and the billet a/c control knobs and billet aluminum washers that range from a 10/32 machine screw to 3/8 oversized washers to be used where the fenders mount on the firewall and cowl.

My new website is www.finchperformance.com and you can order these parts on the website if you have a PayPal account. If you want to use a CC shoot me a PM or email me at [email protected]
Attached Images
          
Reply With Quote
  #2  
Old 01-17-2014, 08:06 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,579
Thanks: 4,189
Thanked 1,443 Times in 625 Posts
Default

Very cool stuff Brian. Let's leave it here, this is the busiest forum.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #3  
Old 01-17-2014, 08:39 PM
coolwelder62's Avatar
coolwelder62 coolwelder62 is offline
Senior Member
 
Join Date: Aug 2005
Location: Vinland Ks.
Posts: 4,269
Thanks: 0
Thanked 3 Times in 3 Posts
Default

Pretty cool stuff Brian.Keep up the good work.
Reply With Quote
  #4  
Old 01-17-2014, 09:02 PM
Sieg's Avatar
Sieg Sieg is offline
Moderator
 
Join Date: Dec 2010
Location: Pacific Northwet
Posts: 7,896
Thanks: 33
Thanked 87 Times in 36 Posts
Default

Well done Brian.
Reply With Quote
  #5  
Old 01-17-2014, 09:37 PM
James OLC's Avatar
James OLC James OLC is offline
Lateral-g Supporting Member
 
Join Date: Jan 2006
Location: Calgary, AB
Posts: 1,458
Thanks: 0
Thanked 1 Time in 1 Post
Default

Nice stuff Brian!
__________________
James
1967 Camaro RS - The OLC
1967 Camaro RS - Recycler
1969 Camaro - Dusty
Reply With Quote
  #6  
Old 01-18-2014, 08:14 AM
tubbed69's Avatar
tubbed69 tubbed69 is offline
Lateral-g Supporting Member
 
Join Date: May 2010
Posts: 2,122
Thanks: 8
Thanked 37 Times in 33 Posts
Default

Brian I bought one of your tank and differential vents and really am satisfied and should be about ready for another one real soon,thanks for all of the extra effoert to help all of us.
Reply With Quote
  #7  
Old 01-18-2014, 02:02 PM
Finch Finch is offline
Senior Member
 
Join Date: Jul 2009
Posts: 132
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by tubbed69 View Post
Brian I bought one of your tank and differential vents and really am satisfied and should be about ready for another one real soon,thanks for all of the extra effoert to help all of us.
Happy to hear you like the part and thanks again for your purchase. Also thanks for taking the time to post up positive feedback, that goes much further than any claims or posts I can make.
Reply With Quote
  #8  
Old 01-18-2014, 03:25 PM
Che70velle's Avatar
Che70velle Che70velle is offline
Senior Member
 
Join Date: Aug 2012
Location: Dawsonville Georgia
Posts: 2,219
Thanks: 609
Thanked 157 Times in 109 Posts
Default

I have been waiting for this boot assembly. Will be ordering one in the next week or so!
__________________
Scott
---------------------------------------------------------------
70 velle' on custom chassis w/custom RideTech coilovers, RED sleeved 434” with Mamo 265’s, F-body Magnum, 12 bolt 3:73, wilwood 6/4's, bla, bla, bla...build. thread https://lateral-g.net/forums/showthread.php4?t=39631
New 434” engine build here https://ls1tech.com/forums/generatio...ved-block.html

Thanks Dad!!

My Chevelle is old school... It has a belt driven power steering pump.
They're 17's, but I keep em clean!
Reply With Quote
  #9  
Old 01-18-2014, 08:00 PM
MoparCar MoparCar is offline
Senior Member
 
Join Date: Oct 2006
Location: Colorado
Posts: 245
Thanks: 1
Thanked 3 Times in 2 Posts
Default

Very nice! Love the shifter boot.
Wes
Reply With Quote
  #10  
Old 01-18-2014, 10:48 PM
GregWeld's Avatar
GregWeld GregWeld is offline
Lateral-g Supporting Member
 
Join Date: Jul 2005
Location: Scottsdale, AriDzona
Posts: 20,642
Thanks: 504
Thanked 1,076 Times in 384 Posts
Default

I'll trade you a Mercedes S63 for all of it Brian... LOL



Superb stuff buddy!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net