...

Go Back   Lateral-g Forums > Technical Discussions > Interior and Electrical
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2018, 09:21 AM
Bob Waters Bob Waters is offline
Member
 
Join Date: Aug 2014
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Default Milspec bulkhead connectors

j






We are working towards paint just mocking up the engine and tranny now. I have been asked how the harness will travel through the bulkhead. I really like the MILSPEC connectors. The wiring is down the road a bit but I want the holes predrilled while we finish cleaning up the firewall. I have no idea how many wires between the engine harness and the body harness would pass through the bulkhead. I would rather overkill than have to go back and drill new holes. I have considered the MILSPEC 41/45 kit but not sure. Any help would be appreciated.

Last edited by Bob Waters; 03-09-2018 at 01:28 PM.
Reply With Quote
  #2  
Old 03-24-2018, 09:45 PM
Tony V Tony V is offline
Senior Member
 
Join Date: May 2009
Location: Arizona
Posts: 143
Thanks: 0
Thanked 29 Times in 11 Posts
Default

check out Terminal Supply out of Troy MI. They started selling Mil type connectors. I did my car with actual Milspec connectors only because I couldn't find any other options. Now that Terminal supply sells something similar I would try theirs for price and ease. I never found one source to get all the milspec connectors I needed so it was a pain. plus very pricey.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net