What have people seen or done on a 70-72 Chevelle in the rear for the widest wheel and tire combo. Trying to find out to set my car up on a set of rear 20's. I am thinking of purchasing a 66-67 rear 12bolt ( still need a axle) and thinking with this older body axle being about 5/8"s narrower might help me or am I on the wrong direction? I had a guy stat to me he was running a 11" wide wheel, you guys see it happening?
I am not looking at going as far of mini tubing.
Any thoughts or help with info would be great.
Thanks
__________________ Nick's 1970 Chevelle project- '70 SBC 383 Stroker - Rushforth Rated X wheels - 14" Wilwood - Anvil Carbon Fiber hood/deck lid - Fesler billet - Corbeau Sport Seats, and still building....
I am running 20" x 10" with 315-35 on the rear of a 1970 Buick grand sport. I had to roll the inner fender lip and run a watts link to keep the rear from moving around. Also modified wheel tubes for some extra clearance but frame rail are not narrowed and tubbed. It's a tight fit but doable. You should be able to run 295/305-20 with no mods. what ever you can find. Also I am running 245-40-19 front.