wheel fitment c10

[usa-69z]

Guys , i have just purchased here in Australia a 70 mod stepside c10..It currently has these massive true wire wheels that hang out of the rear fenders.. My question is - is the 5 stud pattern the same as my 69 camaro?
or am i looking at a specific stud pattern rim to suit a c10?

thanx, Gav

[will69camaro]

If original pattern, the c10 5 lug is a 5 x 5 bolt circle. Fbody is 5 x 4.75.

[214Chevy]

Originally Posted by will69camaro

If original pattern, the c10 5 lug is a 5 x 5 bolt circle. Fbody is 5 x 4.75.

^^^^^^^^
Correct, what he said. Original bolt pattern is 5x5. So, no, 69 Camaro wheels will not fit.

[DriverzInc]

C10's are one of my favorite trucks, and I am building an air bagged one right now, with a 383 stroker motor.

Send me an email or PM, I would love to help you out with wheels and tires.
[email protected]

Travis

[SWAPMEETCRAZY]

Travis may fit u with a set of these--driver inc special!...Schott's Mod 5's ...Slickest billet I've seen ...bought from Jon before change but Travis hasn't missed a beat from what I've seen!!.........jim

[okyankee]

Originally Posted by SWAPMEETCRAZY

Travis may fit u with a set of these--driver inc special!...Schott's Mod 5's ...Slickest billet I've seen ...bought from Jon before change but Travis hasn't missed a beat from what I've seen!!.........jim

how big are the wheels and tires? stock frame?

[SWAPMEETCRAZY]

Originally Posted by okyankee

how big are the wheels and tires? stock frame?

frame--not quite stock!-P.B dropmember
wheels--20x12----315/35/20

[DriverzInc]

Thanks Jim!

Your truck looks absolutely awesome, and love the way that Schott wheel tucks in that picture. Mod5 is one of my favorite wheels from them.

Note:
We just became a Porterbuilt dealer!

[SWAPMEETCRAZY]

Originally Posted by DriverzInc

Thanks Jim!

Your truck looks absolutely awesome, and love the way that Schott wheel tucks in that picture. Mod5 is one of my favorite wheels from them.

Note:
We just became a Porterbuilt dealer!

That was money shot when I was measuring for moser rear--some of the finest billet I've seen-Now your double on my list with PB products!!....Nate definitely has his S##@ together !! Anytime U need some pics or a tutorial on PB let me know--Be glad to help--Can't wait till it's on the road......Wait let me show u how good it looks even upside down!...lol...........jim

[DriverzInc]

Just as good as it does from the top side. I will have to keep posted on your build, for sure. Let me know if you need anything else.

Might take you up on the offer when I add porterbuilt to the site... might need some extra images.