...

Go Back   Lateral-g Forums > Technical Discussions > Engine
User Name
Password



Reply
 
Thread Tools Display Modes
  #21  
Old 04-25-2019, 04:04 PM
yammiman yammiman is offline
Member
 
Join Date: Sep 2013
Posts: 34
Thanks: 0
Thanked 18 Times in 8 Posts
Default

Jeff, what did you end up doing for exhaust? - I just finished putting the Holley Blackheart system on the Camaro I'm building and could offer up every hurdle I encountered!!
Reply With Quote
  #22  
Old 04-27-2019, 11:36 AM
tubbed69's Avatar
tubbed69 tubbed69 is offline
Lateral-g Supporting Member
 
Join Date: May 2010
Posts: 2,122
Thanks: 8
Thanked 37 Times in 33 Posts
Default

Quote:
Originally Posted by yammiman View Post
Jeff, what did you end up doing for exhaust? - I just finished putting the Holley Blackheart system on the Camaro I'm building and could offer up every hurdle I encountered!!
I have not done anything yet,I will gladly take any advice good or bad and if you have any pics I would love to see it installed.thanks
Reply With Quote
  #23  
Old 11-28-2019, 12:00 PM
robert worl robert worl is offline
Junior Member
 
Join Date: Dec 2010
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by yammiman View Post
Jeff, what did you end up doing for exhaust? - I just finished putting the Holley Blackheart system on the Camaro I'm building and could offer up every hurdle I encountered!!
I’m considering the Holley blackheart exhausts system for my 67 Camaro and would be interested in hearing from you about your install. I have the DSE Quadra link rear suspension, however I was thinking I might only purchase the X pipe from Holly as I may go with 2.5” out of the muffler up and over the axel to the rear of the car.
Also I don’t have the Holley headers. I have a older set of Stainless Works headers and I’m not sure about the difference in the spread between the Holley blackheart exhaust system X pipe inlet and the spread of my headers at the collectors when installed on my LS motor. I called Holley and the sales rep was unable or unwilling to get me a measurement of there X pipe. So if you could get me a center to center measurement at the inlet to the Holley X pipe that would be very helpful. Any pictures and tip on how the install went would be appreciated.
Thanks, Robert
Reply With Quote
  #24  
Old 11-29-2019, 03:46 PM
tubbed69's Avatar
tubbed69 tubbed69 is offline
Lateral-g Supporting Member
 
Join Date: May 2010
Posts: 2,122
Thanks: 8
Thanked 37 Times in 33 Posts
Default

Sorry I sold my car and never finished the exhaust.
Reply With Quote
  #25  
Old 11-29-2019, 08:43 PM
Gmachine1911's Avatar
Gmachine1911 Gmachine1911 is offline
Senior Member
 
Join Date: Oct 2017
Location: Southern IN
Posts: 472
Thanks: 65
Thanked 373 Times in 250 Posts
Default

My experience when doing the exhaust on my 68 Camaro with the Quadralink setup was that even the 2.5” diameter pipe had no room going over the axle. I ended up notching my trunk corners to get enough room. Mine is all 3” pipe but we did put some 2.5” up there just to see if the real estate was there before I notched the corners.
Attached Images
  
__________________
Shane
#theanchorholds

Link to my 68 Camaro build thread:
https://lateral-g.net/forums/showthread.php?t=56387

Link to my 67 Nova build thread:
https://lateral-g.net/forums/showthread.php?t=57769
Reply With Quote
The Following 2 Users Say Thank You to Gmachine1911 For This Useful Post:
Corey R. (01-05-2020), Ns RS (12-03-2019)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:14 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net