Momo steering wheel, Ididit column and NRG adapter?

[Ron in SoCal]

Originally Posted by Greg from Aus

Nah Ron the spline should bottom out and then the 30 thou of the outer bottom would give clearance.

10-4 Greg. Thanks...

[glassman]

Originally Posted by BBC71Nova

So I have a replacement Ididit column i'm gonna be installing. I'm wanting to run an aftermarket steering wheel. Looking at maybe a Momo model. After "googling" around I came across the NRG Short Hub Adapter for domestic applications which includes Ididit brand columns. NRG also sells a pretty sweet looking quick release setup. The short hub description states it is made for their quick release. All three of those components, i.e. wheel, hub and quick release, have a 6 bolt pattern.

I'm curious if you can run the short hub adapter directly to the wheel without the quick release? The QR is cool but I'm concerned it would but the wheel too close to the driver. If nobody happens to know, i'll just give them a call next week.

Any other thoughts on the NRG products? I'd never heard of the brand till I started looking for this type of setup. Products look nice but hand-on experience from some Lat-g peeps would be a plus :-).

Thanks!

Not sure if you can do it outside of the quick release, go to the NRG site and theres some good info, but only some. Most of the info i found on this is from sites like this.

I wanted the QR for the security aspects (being able to take it with me on overniter's) not to mention the safety aspcect when i'm on the track and God forbid something goes wrong....and yes, so far there all 6 holes, Sparco, Momo and a few others fit. NRG also make their own wheels...