Time to fix another issue that came up with this particular combination...
I bought a Concept1 front drive system while putting the car together. After final assy it turned out that the single belt front drive setup was designed to run everything off the forward positioning of the Super Charger drive pulley. This had all the pulleys and tensioners in that forward position. After the Radiator and fans were installed, everything fit but just barely..... If something would have happened on the road there would have been some major issues having access to the components on the front of the engine..... An uncomfortable position I didn't want to put myself in..... So...
In looking at the other set-ups that are available, I decided to get purchase a Wegner LSA drive.....A two belt set-up that will provide a lot more access for maintenance in this particular application...
So... If you are going to need a LSA front drive set-up and install it in a car that has more clearance in front
Here is a 100% complete Concept 1 system that has only a couple thousand miles on it and you can save a lot of $$$$$...
LOL....
Here are some ongoing pic's of the change over
New Wegner assy
Radiator out
Concept 1 unit ready to come out....
You can see where the fan was making contact with the Tensioner
I have a harmonic Balancer puller in the garage some where......LOL......Waiting for the new one to show up so I can get this one off and start the re-install..