Go Back   Lateral-g Forums > Technical Discussions > Engine
User Name

Thread Tools Display Modes
Old 03-10-2018, 01:05 PM
BBShark BBShark is offline
Join Date: Nov 2007
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default My CNC'd Port FI Plenum

After an embarrassingly long time, I have finally finished the BBC port injection plenum. Engine is a 502 and the intake or base for the plenum is a modified RamJet. This is going into a 68 Corvette with a stock BB hood so I was really restricted on height at the front of the engine.

At this point I have the engine mounted in the rolling chassis (body off) and am plumbing the fuel system. 1st pic is CAD model, 2nd pic is mocked up right off the machine, 3rd pic is in process and last is assembled engine

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright Lateral-g.net