Hey Guys, Where is everyone going through the firewall on the engine and pedal harness? And what about the seal? I have the GM controller, so the fuse block is pretty big. Was planning on putting it behind the ash tray, but where on the computer is good? Just looking for options.... TIA!
I made a hole right behind passenger head, just above the factory ribs in the firewall. I can shoot you a pic if you give me an email. I have the gm harness as well and it worked out perfect. I ended up finding a grommet in the junkyard from a Toyota from the door jamb harness, it was exactly 1.5 inch which was exactly the size hole I made in the firewall. I cut and taped it into the harness, worked out great.
I made a hole right behind passenger head, just above the factory ribs in the firewall. I can shoot you a pic if you give me an email. I have the gm harness as well and it worked out perfect. I ended up finding a grommet in the junkyard from a Toyota from the door jamb harness, it was exactly 1.5 inch which was exactly the size hole I made in the firewall. I cut and taped it into the harness, worked out great.