Go Back   Lateral-g Forums > Technical Discussions > Interior and Electrical
User Name

Thread Tools Display Modes
Old 03-09-2018, 10:21 AM
Bob Waters Bob Waters is offline
Join Date: Aug 2014
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Default Milspec bulkhead connectors


We are working towards paint just mocking up the engine and tranny now. I have been asked how the harness will travel through the bulkhead. I really like the MILSPEC connectors. The wiring is down the road a bit but I want the holes predrilled while we finish cleaning up the firewall. I have no idea how many wires between the engine harness and the body harness would pass through the bulkhead. I would rather overkill than have to go back and drill new holes. I have considered the MILSPEC 41/45 kit but not sure. Any help would be appreciated.

Last edited by Bob Waters; 03-09-2018 at 02:28 PM.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright Lateral-g.net