"FUeL" RENDERINGS!!!!!!!

[Datsbad]

I wanted to share a rendering of what Kris and I are working on . It is not done but I wanted to show you guys what I am working on and what you WILL see at the 2006 Powertour . My one employee that is helping the most and myself are going to drive it to Florida and then join in on the powertour for the ride home to NJ , then back 4-hrs west to our town . Should be about 3,000 miles total !

This is a car I plan to race in some events that we sponsor at some tracks local . The engine (LS2 402 cid)will produce in the 550 rwhp range and we are using the Harrop Huricane intake from Australia.

The car has 18" HRE 843r wheels anodized black 18X8.5'S AND 18X12's Pirrelli P-Zero's , full Baer brakes 6 piston front and rear , Full chromoly roll cage , Fire supression system, All of DSE's front and rear coilover suspension, tremec 6 speed , 9" alum center rear , DSE subframes, cneter mount emergency brake, and some other custom touches not shown in the renderings .

I figure total time on this car we are working with is 7 months

Thanks for looking , Jason

[ProdigyCustoms]

That seems doable. Gotta love black. Are you running 6 pistons on the rear? See ya at Power Tour

[Datsbad]

Hey Frank ! . Yeah it shouldnt be to bad to get it done . but its not the only car we are working on .

As for the brakes yes 6 pistons on the rear with internal parking brake assembly.
Definately see you there !

[69Nova]

I love the black on black combo . Good luck with your project and see you on the power tour.

[PairOf69's]

I'm really looking forward to see this thing on the tour, got any details on the e-brake? keep up the good work!

[jack67rs]

Very nice, really liking the center of the wheels done in gray or darker colors.

[XcYZ]

Nice!

[ProdigyCustoms]

Are you going to be able to hold off the rears to keep proper bias?

[Blake Foster]

That looks almost exactly like the drawing we have of the one we are doing right now except for the RS grill and our wheels are a brushed aluminum finish on the centers but same wheels. that will be a bitchi'n car. good luck on the build

[Datsbad]

Originally Posted by ProdigyCustoms

Are you going to be able to hold off the rears to keep proper bias?

I think so , keep in mind that the Baer 6 piston rears are not just fronts moved to the rear . They are a totally different calipers with different bore sizes than front.