...

Go Back   Lateral-g Forums > Technical Discussions > How To's, Tips, and Tricks
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 08-17-2016, 08:48 PM
Ghiaguy's Avatar
Ghiaguy Ghiaguy is offline
Member
 
Join Date: Dec 2015
Posts: 50
Thanks: 0
Thanked 4 Times in 4 Posts
Default What is everybody doing to check piston/valve clearance

Was looking for my old stash of clay and finally found it all dried up and worthless...... Is there a newer, tricker way to check clearance????

If not where do I find a replacement quantity of clay, and what type of clay are you using?????

Enquiring minds want to know,,,,,, LMAO
Reply With Quote
  #2  
Old 08-17-2016, 09:43 PM
Che70velle's Avatar
Che70velle Che70velle is offline
Senior Member
 
Join Date: Aug 2012
Location: Dawsonville Georgia
Posts: 2,219
Thanks: 609
Thanked 157 Times in 109 Posts
Default

I use modeling clay. Lightly spray your piston top, and the bottom of the valve with wd-40 or use a very light oil. This prevents sticking and staining.
I've heard people use "play-do" as well, but I've never tried it.
I've seen people use solder, but it only shows you the dimension in a tiny spot, and I like to see my dimensions across the valve face.
As far as a newer, tricker way, there probably is, but clearance is clearance, Clarence!
__________________
Scott
---------------------------------------------------------------
70 velle' on custom chassis w/custom RideTech coilovers, RED sleeved 434” with Mamo 265’s, F-body Magnum, 12 bolt 3:73, wilwood 6/4's, bla, bla, bla...build. thread https://lateral-g.net/forums/showthread.php4?t=39631
New 434” engine build here https://ls1tech.com/forums/generatio...ved-block.html

Thanks Dad!!

My Chevelle is old school... It has a belt driven power steering pump.
They're 17's, but I keep em clean!
Reply With Quote
  #3  
Old 10-27-2016, 08:30 PM
Neil B Neil B is offline
Senior Member
 
Join Date: Jul 2007
Posts: 424
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I use a degree wheel and a dial indicator on the valve tip with a checking spring installed. I check in 5 degree increments from 10 degrees BTDC to 10 degrees ATDC.
Reply With Quote
  #4  
Old 11-19-2016, 03:04 PM
qtrracer's Avatar
qtrracer qtrracer is offline
Junior Member
 
Join Date: Sep 2015
Location: Maryland
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Neil B View Post
I use a degree wheel and a dial indicator on the valve tip with a checking spring installed. I check in 5 degree increments from 10 degrees BTDC to 10 degrees ATDC.
x2. I have a used head gasket for the procedure. I find this method lots easier and more accurate than the clay method.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net