I got the subframe, front suspension, and brakes installed. I used the Detroit Speed body mounts- very nice pieces.
The upper link tabs were installed. I never figured out an accurate method to measure how straight the axle was before/after the welding. So, in an effort to reverse the warping from mounting the tabs on the top of the axle tube, I welded roughly the same amount of beads on the bottom of the axle, then ground it off. Not very accurate or scientific, but it will hopefully function until I upgrade the rear end.
Finally got it all together and installed.
Once I install the rear brakes, I can get the car on wheels and install the subframe connectors.
Daniel
Last edited by DWC; 03-19-2018 at 07:11 PM.
|