The Shrifter is back!

[XcYZ]

It's official, the Shrifter is now for sale! Check out www.TwistMachine.com for more details.

I want to congratulate Steve for the hard work he has put into this. I hope it's as huge as I expect it to be!

[camcojb]

It will be. It was a large part of my decision to go with an auto. Thanks Steve!

Jody

[jonny51]

Congrats Steve, I am sure you will sell a bunch of them~

[Ummgawa]

I wish you great success Steve ! Great Product!! Now I have to build an automatic car to use it.

[Steve Chryssos]

In the immortal words of Steve Martin from The Jerk: "The new phone books are here!!....The new phone books are here!!....I'm somebody now!!....I'm somebody now!!

Thanks for the kind words. And thanks to Scott for putting together our website.
The banner looks great as well Scott. Thanks.

[hotwheels]

that is pretty damn kewl i have never seen anything like that.....all my stuff is manual, but if i had an auto, i would give er a try........hotwheels

[Ricochet]

Congrats Steve!! You'll be getting a call from me when I'm ready, no doubt. Question...All this plugs into a TCI controller, which was from what I know designed my John Meany. Will this system plug into John's new Big Stuff 3 controller which is built into his engine management system as well?

Thanks-
Brent

[Steve Chryssos]

Originally Posted by Ricochet

Question...All this plugs into a TCI controller, which was from what I know designed my John Meany. Will this system plug into John's new Big Stuff 3 controller which is built into his engine management system as well?

Brent,
I spoke to John the other day. He says that you will need to specify "Shrifter Ready" when you order your engine/trans controller. I'm working with all the controller companies to maintain plug & play compatibility through the addition of a 3 pin metri-pak connector in their wiring harnesses with the correct pin assignments.

[camcojb]

Originally Posted by streetfytr68

Brent,
I spoke to John the other day. He says that you will need to specify "Shrifter Ready" when you order your engine/trans controller. I'm working with all the controller companies to maintain plug & play compatibility through the addition of a 3 pin metri-pak connector in their wiring harnesses with the correct pin assignments.

Now you tell me!!!!!!! Mine is back being modded at the moment. Let me see if it's still there.

Jody

[MaxHarvard]

AHHAHHAHAHA I could put one in my 2000 S10 with the 4.3 and the 4L60E

HAHAHHAHA!!! *breath* HEEEEEEEEHAAAAAAAAHAHAHHAH!!!!!