...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Project Updates
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2005, 06:07 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,579
Thanks: 4,189
Thanked 1,443 Times in 625 Posts
Default Got my RFR Fabrication sheet metal valve covers!

Matt and I got together and came up with a unique way of doing the centerbolt covers without using big support washers on top. They also are wider than a standard small block cover which I think looks cool. They use a button head stainless allen bolt to hold them down (not shown) which is a theme in my engine compartment.





Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #2  
Old 02-02-2005, 06:29 PM
jonny51 jonny51 is offline
Lateral-g Supporting Member
 
Join Date: Jul 2004
Location: Petaluma,California
Posts: 2,530
Thanks: 0
Thanked 1 Time in 1 Post
Default

Matt sure does some nice work.It looks like its really coming together Jody.By the way I like the new look of the turbos much better IMO.
Reply With Quote
  #3  
Old 02-02-2005, 06:51 PM
lil427z's Avatar
lil427z lil427z is offline
Senior Member
 
Join Date: Dec 2004
Posts: 865
Thanks: 0
Thanked 0 Times in 0 Posts
Default

jody , i like it you did good.






rick kirkindall
Reply With Quote
  #4  
Old 02-02-2005, 08:06 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,579
Thanks: 4,189
Thanked 1,443 Times in 625 Posts
Default

Thanks Rick, Jonny!

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #5  
Old 02-02-2005, 08:14 PM
zbugger's Avatar
zbugger zbugger is offline
Senior Member
 
Join Date: Jul 2004
Location: Like it matters...
Posts: 1,271
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Damn showoff.... Show the world why don't you!!!!




















Wait a second......
Reply With Quote
  #6  
Old 02-02-2005, 08:18 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,579
Thanks: 4,189
Thanked 1,443 Times in 625 Posts
Default

Allen,

I don't post a lot anymore on the other site, but I did with this one because I wanted Matt to get some credit for his work. He wasn't happy with how they turned out but I am which is what matters.

Now, play nice buddy!

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #7  
Old 02-02-2005, 08:18 PM
Pro T Mustang's Avatar
Pro T Mustang Pro T Mustang is offline
Member
 
Join Date: Jan 2005
Location: Beaufort NC
Posts: 30
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Man if thats all the engine I could find I would not even bother J/K !! That thing is SWEET!!!! Gotta have a sheetmetal upper!!
__________________
68 Mustang Coupe,5.0 EFI ,T-5 5speed,18" ADR's,275/40/ rears,225/40 fronts....yeah a start.
Reply With Quote
  #8  
Old 02-02-2005, 08:29 PM
c.schulz's Avatar
c.schulz c.schulz is offline
Supporting Member
 
Join Date: Jul 2004
Location: Ortonville,Michigan
Posts: 299
Thanks: 0
Thanked 0 Times in 0 Posts
Default Jody

Jody your such a tease!!! First you show us the suspension all painted up shinny and pretty then you show us your hot new valve covers.But your still not showing the most important thing!! Give up the pics of the jet black supper shinny,deeper than love paint job!!!!
Your humble fan,Chris
__________________
71 RS Pro-Touring thing.....will it ever be done?? Not with out a second mortgage! SOLD

Last edited by c.schulz; 02-02-2005 at 08:33 PM.
Reply With Quote
  #9  
Old 02-02-2005, 08:31 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,579
Thanks: 4,189
Thanked 1,443 Times in 625 Posts
Default

Quote:
Originally Posted by c.schulz
Jody your such a tease!!! First you show us the suspention all painted up shinny and pretty then you show us your hot new valve covers.But your still not showing the most important thing!! Give up the pics of the jet black supper shinny,deeper than love paint job!!!!
Your humble fan,Chris
Believe me I'd LOVE to. It will now be next week. This may be what makes me miss the Power Tour as it was supposed to be done by the end of December. Losing 4-5 weeks is a killer.

As SOON as I have something to post I will!

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #10  
Old 02-02-2005, 08:38 PM
c.schulz's Avatar
c.schulz c.schulz is offline
Supporting Member
 
Join Date: Jul 2004
Location: Ortonville,Michigan
Posts: 299
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I wish I lived closer.Id be there helping ya spin wrenches every night.Keep a positive attitude that you will make the power tour!! We have faith in ya Jody.We understand that you wont sacrafice quality just to get on the tour.
Your humble fan,Chris
__________________
71 RS Pro-Touring thing.....will it ever be done?? Not with out a second mortgage! SOLD
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:50 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net