...

Go Back   Lateral-g Forums > Technical Discussions > Engine
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 06-30-2014, 09:35 AM
SkeWest SkeWest is offline
Junior Member
 
Join Date: Jun 2014
Location: KC
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default Headers that fit with ridetech tru turn on 1969 Camaro

Hi. I've got a 69 Camaro with a sbc and I'm having issues finding headers that will fit with the tru turn setup. I've done some searching and found some that say the Dynatech #740-21310 will clear but the thread was a couple of years old so I thought I'd see if anyone had any additional info. I called Ridetech and they told me that people have had luck with Dynatech and Summit, but they couldn't give me any specific model numbers.

My setup is sbc with straight plugs, ridetech tubular a arms, muscle bar, and coil overs. M22, vintage air front runner, compact starter, and stock steering box.

Thanks for any help
Reply With Quote
  #2  
Old 06-30-2014, 11:05 AM
RBuhr69's Avatar
RBuhr69 RBuhr69 is offline
Senior Member
 
Join Date: Dec 2011
Location: Jacksonville, FL
Posts: 286
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I have dynatech headers and slide in place without any issues with stock steering box. Just have to get the car up high enough to clear the ground cause they have t ogo in at an angle fromt the bottom......My plugs are angled though, so not sure about straight plug heads.

Last edited by RBuhr69; 06-30-2014 at 11:11 AM.
Reply With Quote
  #3  
Old 06-30-2014, 12:18 PM
SkeWest SkeWest is offline
Junior Member
 
Join Date: Jun 2014
Location: KC
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks. What model of dynatechs are you using?
Reply With Quote
  #4  
Old 06-30-2014, 12:42 PM
RBuhr69's Avatar
RBuhr69 RBuhr69 is offline
Senior Member
 
Join Date: Dec 2011
Location: Jacksonville, FL
Posts: 286
Thanks: 0
Thanked 0 Times in 0 Posts
Default

these are the ones I have..
1 5/8 - 1 3/4
http://www.summitracing.com/parts/DTC-740-23210/


Others have said the yused the bigger tube one..
1 3/4-1 7/8 stepped headers. Part # 740-21310
Reply With Quote
  #5  
Old 06-30-2014, 03:13 PM
SkeWest SkeWest is offline
Junior Member
 
Join Date: Jun 2014
Location: KC
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks a lot!
Reply With Quote
  #6  
Old 06-30-2014, 06:25 PM
RBuhr69's Avatar
RBuhr69 RBuhr69 is offline
Senior Member
 
Join Date: Dec 2011
Location: Jacksonville, FL
Posts: 286
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here is a photo of them installed and the clearance by the pitman arm and drag link..This is the area to be concerned with.
Attached Images
 
Reply With Quote
  #7  
Old 07-01-2014, 10:22 AM
SkeWest SkeWest is offline
Junior Member
 
Join Date: Jun 2014
Location: KC
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Perfect! Just ordered mine. Thanks again.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net