new project / already having a blast

[ModernMuseum]

Originally Posted by 67ragtp

Wayne- Thanks, I do feel a lot better, it just needs to be dialed in. I will keep you posted.

ModernMuseum- Thankyou, Dont mind at all, the intake tubing is from spectre performance you can purchase through summit or jegs. One 90deg 4 inch OD alluminum tubing with a 7 inch leg- part number 97990 and one 22 deg 4 inch OD alluminum tubing with a 6 inch leg- part number 97290

The filter is K&N part number RE-0870
And an AEM dry flow pre-filter part number- 1-4001

The MAF housing and sensor is a Powermax- powerMAF 100 its basically a stock ls7 hitachi sensor with there custom housing.

I used spectre's couplers. Hope this helps- Rich

Rich-

That Spectre coupler that you are using to connect the two intake tubes together with....how long is that by chance? I looked on summit and the longest one I could find is 3", but it looks like the one you have there is around 6". Thanks.