...

Go Back   Lateral-g Forums > Technical Discussions > Trucks
User Name
Password



Reply
 
Thread Tools Display Modes
  #21  
Old 08-26-2015, 06:15 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

The plate is plug welded in place with a few stitches around the perimeter.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #22  
Old 08-26-2015, 06:19 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

The 3 bolt holes are drilled thru from the inside. The top bolt is above the upper tangent so it won't be flush. The upper hole was opened up to about 3/8" thru the cowl (just large enough the clear a 1/4-20 socket head cap screw)
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc

Last edited by Ambition Road; 08-26-2015 at 06:39 PM.
Reply With Quote
  #23  
Old 08-26-2015, 06:21 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Motor is installed
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #24  
Old 08-26-2015, 06:25 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Inside view
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #25  
Old 08-26-2015, 06:27 PM
Musclerodz's Avatar
Musclerodz Musclerodz is offline
Senior Member
 
Join Date: Nov 2004
Location: washington, ok
Posts: 4,273
Thanks: 22
Thanked 159 Times in 93 Posts
Default

Thats awesome you figured it out, but sucks that DSE is currently not producing wiper motors at this time.
__________________
Mike Redpath
Musclerodz & Customz
facebook page
Reply With Quote
  #26  
Old 08-26-2015, 06:28 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

The top bolt will need to be sealed during final assembly with a small amount of 3M strip caulk.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #27  
Old 08-26-2015, 06:30 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Taking measurements before cutting, the stock arm will be welded to the DSE arm with the splined hole.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #28  
Old 08-26-2015, 06:32 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Tacked together, rechecking measurements.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #29  
Old 08-26-2015, 06:33 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Welded and metal finished.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
  #30  
Old 08-26-2015, 06:36 PM
Ambition Road Ambition Road is offline
Lateral-g Supporting Vendor
 
Join Date: Apr 2015
Location: Troutman, NC
Posts: 104
Thanks: 35
Thanked 68 Times in 14 Posts
Default

Update complete. Upon final assembly the "park" position will need to be set and nut torqued.
Attached Images
 
__________________

Aaron Elenbaum
www.ambitionroad.com
[email protected]
704-608-6967

*Now scheduling full turn-key custom builds
*Sheet metal restoration and replacement
*Pro-touring rollers

Follow all our builds on FB--> https://www.facebook.com/Ambitionroadllc
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net