anyone have a drive shaft

[importkiller69ss]

im looking for a driveshaft that will work for my 69 camaro witha 700r4..either one that is for this application or one that i can cut to make work ect..let me know what you got this is the last thing i need to get the girl back on the road with the new tranny..

[jbutlr]

Where are you located. I have one I just pulled off my th400. You might be able to make it work.

[importkiller69ss]

im located in souther louisiana..i wonder what it would be to ship that thing..

[Z06vette]

I have a stock shaft from a 69 camaro with turbo 350. You would need to have it shortened. I am in Pensacola. Shouldnt be too much to ship. Scott

[importkiller69ss]

what do you want for it..or even a questimate on shipping

[astroracer]

Save yourself the shipping dollars and pick up a used shaft at the junkyard. Any Astro Van, truck or S10 that had a 700R4 will have exactly what you need.
Are you still running the stock rear? You may be able to re-use the stock driveshaft by swapping on a new yoke with an "adapter" u-joint... Something to check into.
Mark

[importkiller69ss]

my stock drive shaft is toast broke on me doing 80 on the interstate this is why im doing the tranny swap. kinda tore up my old one..and yes i am useing the stock rear..so at a wrecking yard what would i be looking at for a donor

[patriot68]

http://www.thrashdriveshaft.com/
their shafts are made to order and are top quality..it will probably not cost much more than having a shaft cut...