01somta
12-27-2009, 05:14 PM
1968 camaro project, I have around 45k in reciepts not including the gen VI 502. Every part on this car is brand new except the 502 and it came out of a friends wrecked 2nd gen camaro with 1k miles.
Motor
502 Gen VI 4 bolt main, 9:1 CR
Crane solid roller p/n 168601 cam .615 .636 246 254 dur @ .050,
crane solid roller lifters
GMPP 12363400 Aluminum Rectangle port heads
GMPP 12361323 1.7 alum Rockers
Edelbrock victor jr 454-R intake
Crank Ext. ballanced, nitriated, crossed drilled gm p/n 10198922
Rods Forged 4340 Steel
Pistons GM P/N 12533507 Forged Aluminum
MSD Pro-Billet Dist
Lemons headers
Vintage air front runner setup
Transmission
tko 600
rearend
shortened ford 9" with detroit locker
33 spline axles
suspension
rear: 4 link with qa1s'
front: detroit speed kit 1
wilwood drilled slotted 4 piston front and rear
wheels
Budnik M5s 18x12 w/ 5.25" BS (R) and 18x8 w/ 4.75 BS (F)
Tires are Michelon Pilot sports 335/30/18s (R) and 245/40/18s (F).
Body
media blasted (only rust is minor and in the window channels)
new rear quarter panels
new front fenders
new 2" hood
new lower valance with 69 running lights grafted in.
new header panel.
smoothed firewall
new decklid
smoothed rear sheetmetal spoiler (3 piece)
mini tubbed
new floor pans
undercoated with raptor liner
#1 build thread
http://www.lateral-g.net/forums/showthread.php4?t=12975&highlight=camaro
#2 build thread
http://www.lateral-g.net/forums/showthread.php4?t=13661&highlight=camaro
Asking 25K FIRM or might take trade on a complete car. If you have any questions about the car just shoot me a pm.
Thanks
Motor
502 Gen VI 4 bolt main, 9:1 CR
Crane solid roller p/n 168601 cam .615 .636 246 254 dur @ .050,
crane solid roller lifters
GMPP 12363400 Aluminum Rectangle port heads
GMPP 12361323 1.7 alum Rockers
Edelbrock victor jr 454-R intake
Crank Ext. ballanced, nitriated, crossed drilled gm p/n 10198922
Rods Forged 4340 Steel
Pistons GM P/N 12533507 Forged Aluminum
MSD Pro-Billet Dist
Lemons headers
Vintage air front runner setup
Transmission
tko 600
rearend
shortened ford 9" with detroit locker
33 spline axles
suspension
rear: 4 link with qa1s'
front: detroit speed kit 1
wilwood drilled slotted 4 piston front and rear
wheels
Budnik M5s 18x12 w/ 5.25" BS (R) and 18x8 w/ 4.75 BS (F)
Tires are Michelon Pilot sports 335/30/18s (R) and 245/40/18s (F).
Body
media blasted (only rust is minor and in the window channels)
new rear quarter panels
new front fenders
new 2" hood
new lower valance with 69 running lights grafted in.
new header panel.
smoothed firewall
new decklid
smoothed rear sheetmetal spoiler (3 piece)
mini tubbed
new floor pans
undercoated with raptor liner
#1 build thread
http://www.lateral-g.net/forums/showthread.php4?t=12975&highlight=camaro
#2 build thread
http://www.lateral-g.net/forums/showthread.php4?t=13661&highlight=camaro
Asking 25K FIRM or might take trade on a complete car. If you have any questions about the car just shoot me a pm.
Thanks