Bad Ass 69 Camaro Project (in Canada Car)

[Leadfoot1]

CAR HAS SOLD!!!! PLEASE SEE POST #6 FOR DETAILS, SOLD AS A ROLLER NOW SPLITTING THE REST!!!!

.................................................. .................................................. ..................



Ok....

Seeing what is being offered i was holding to post it up here but here goes;

I bought this car from a friend to which i had sold all my Pro Touring parts a few years back (wheels/ tires, brakes, trans etc etc). He put a lot of time and money in the shell and suspension and had gotten all my stuff when i decided to finish my Vert project more in a Street machine manner. He's moving out of the country so i bought his project but only to get my old (new) parts back and am going to let go of the body as i just finished my 5 year project and have no juice left to embark on a new venture....

Here it goes;

Body is new at 90% Only top and trunk lid have not been replaced. I have 2 set of front fenders (one original very nice -not pictured- and one set of fiberglass-not pictured either original to car are on it in the pics not bad but not to my liking). It has new hood, header panel, lower valance, new doorS, full floor fully welded, 2/ 1 piece rear floor units but not installed need to be put in but trunk drop sides are installed with full custom tubs (VERY nicely finished) new dash panel (needs finishing) Overall a brand new Camaro shell.

The rear suspension was done by a large local Shop that does Nascar cars and they used Comp rails and custom parts to do a Tri-Link set up with a Killer anti sway bar w/adjustable rod ends everywhere. Its hung by QA1 coil overs and a panhard bar. The rear is from Strange and is 100% built and new (gear-3.89- Axles, posi, etc) with everybracket fully welded in. Its a nice set up and sits the car very low. I would cut the floor to make some place to pass the exhaust in the floor to allow the stance to be as is and not show the exhaust from the side, easily done and the car deserves it.

The front is also custom made witha QA1 set up also and a splined sway bar. The clip was built using a C4 Crossmember so it was easier to make sure everything was right on and my friend saved some cash there,,,Its nice and definetily does the job...and sits any LS motor!!

The car would come on rollers and empty (no motor or trans) but i have the rear seat a lot of the interior but not the front seats, a lot of the small parts we're sent out to be cleaned and coated (window tracks, bolts, bits and pieces etc etc) I'm sure i'm forgetting stuff and there is some i might add for the right buyer but for now its enough typing....

I'm asking 15,500$ locally (Montreal area. Canada) And i have a clean and clear title in hand.

Please no dreamers or low ballers...I have done my best to be as precise and as clear as to the condition of the car to respect all of you potential buyers so i would appreciate the same in return.

Thanks for the interest.

I have some feedback i could give if necessary as i already sold, bought on the site.

Lead. (Mario)

Now what...Pics??? Of course!!!!!!

http://i138.photobucket.com/albums/q251/Leadfoot1969/0878f6c_20.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2220.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2322.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2305.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2288.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2285.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2327.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2246.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2237.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2230.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2258.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2263.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2272.jpg

[Leadfoot1]

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2307.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2274.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2264.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2311-1.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2321.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF2321.jpg

:lateral: :cheers:

Lead.

[dwilson]

Very nice car, any chance to split up any of the parts such as wheel/tires and breaks?

[Leadfoot1]

Not at the moment. I'm debating if i'm goint to join the crowd and put a twin screw on the 6.0 and drop it in with the T56, the brakes and the wheels, but i have yet to decide...I'm planning on putting the wheels on the Car (the 'vert) to give me an idea of if i'm going to Flip over it (:faint: ) or if i'm just going to be ''Ho hum'' of it...Its a lot of work still to swap everything over (not that much i know, but in my condition- 2 inportant back surgeries lately) its a lot to just have finished the project...So i dont know.

Thanks for the interest tough. (I get a lot of this so they'd sell pretty easily i guess).

Yesterday i contacted Forgeline to ask if i can get the wheels Diamond cut and powder coated black to give you an idea....

I'll post if i decide to go that way. :thumbsup:

Lead.

[John510]

Nice car. Nice price. Bump

[Leadfoot1]

CAR HAS SOLD!!!!

Im now going to be gauging interest in splitting the parts i have left, some need to leave before i sellothers.

WHEELS AND TIRES
Forgeline Zx3P In polished lips and gunmetal centers, 19x9 and 20x13 w/ 245 front and 345-25-20 rr's. 4000$

Z-06 Brake set up complete, zero miles in boxes and comes w-core 3 bracketery and hoses 2000$

LS Style T56 w spec clutch nib, 2000$

clutch bracket (firewall) for camaro 125$

Hooker super comp Ceramic Headers NIB Never mounted (gasket pack not even opened) 600$

Edelbrock Victor Jr Intake w/MSD 6LS to run carb'd LS1 and other 650$ Never taken out of box.

some more i will post as i remember...

Decided to keep my 'Vert as is and buy a trailer and an F2 Procharger and get done with it lol!!!

Mario (Lead.)