View Full Version : New 1st Gen Camaro center console by MCI
This is our new 1st Gen console.
Mike
MCI
260-602-7651
[email protected]
68ZClone
12-26-2012, 06:25 PM
Is there a website where we can view all available consoles?
http://www.modernclassicsinteriors.com
MCI has a banner on Lateral-G also.
Mike
MCI
[email protected]
260-602-7651
Bsinclair
12-26-2012, 09:45 PM
mike, can you set that in a car and take a pic? would be good a good visual..
Thumpt
12-27-2012, 12:13 AM
Do they are any other vendor do a concole for a 69 c10.
Do they are any other vendor do a concole for a 69 c10.
I have a few consoles that will work in a 69 c10, do you have bucket seats or a bench seat?
Mike
MCI
[email protected]
260-602-7651
mike, can you set that in a car and take a pic? would be good a good visual..
Yes, I can do that. When I return to work next week I will post some pictures.
This is a new console for us. I have 6 that are being installed by customers.
We should have some pictures from them soon as well.
Mike
MCI
[email protected]
260-602-7651
http://www.modernclassicsinteriors.com
Thumpt
12-27-2012, 09:51 PM
I have a few consoles that will work in a 69 c10, do you have bucket seats or a bench seat?
Mike
MCI
[email protected]
260-602-7651
Its a 60/40 bench but in the future may go 40/20/40.
Thanks Mark.
Its a 60/40 bench but in the future may go 40/20/40.
Thanks Mark.
Are you looking for a console that meets the bottom of the dash or one that sits under the dash?
32deucecoupe
02-22-2013, 08:59 PM
So is this the Gen 2 stilleto? does it fit a first gen? Looking for one that will allow the mounting guages at the dash..
So is this the Gen 2 stilleto? does it fit a first gen? Looking for one that will allow the mounting guages at the dash..
Jeff, send me your email address and I will send you some more info on this console. This is a Gen 1 Switchblade, it isn't up on our website yet.
Mike
MCI
260-602-7651
WicKeD_SS
03-02-2013, 09:35 PM
Yes, I can do that. When I return to work next week I will post some pictures.
This is a new console for us. I have 6 that are being installed by customers.
We should have some pictures from them soon as well.
Mike
MCI
[email protected]
260-602-7651
http://www.modernclassicsinteriors.com
I am VERY interested in this!! I have been looking for something like this IF it will go all the way to the bottom of the dash for a 67/68 camaro. I need to see pics when you get them up.
32deucecoupe
03-06-2013, 12:07 PM
Any progress getting these up on the website..are they available with all of the standard options?
Dunatics
03-14-2013, 01:16 AM
Hi first timer here. I am currently re-doing the interior and I am adding a center console. I would love to see some pics in a car as I know others would also. The design looks good but it's not in the car.
Thanks.
Dunatics
03-20-2013, 06:13 PM
Any pics yet?
VetteCam
04-03-2013, 05:01 PM
Nice console
Rhino
04-30-2013, 09:23 PM
I'd be interested in pics as well. Nothing fancy, I'd just like to see how the lines of the console meet up wi the dash.
paulk68
05-10-2013, 06:43 AM
sendig this back up to hopfully get some pics of this mounted in a 67-68 camaro
WicKeD_SS
05-12-2013, 08:30 PM
x2 :headspin:
69dragracer
05-13-2013, 10:57 AM
Here is a pic from the installation in my 68. Sorry, pic is from my cell phone so quality is not the best. Will upload a better picture of the finished installation later this week.
We should have some new pictures after this weekend. The upholstery shop is just about done with a console that is covered in black vinyl with a painted gauge panel.
jwcarguy
06-17-2013, 11:21 AM
Mike
Along with pics
I think that some dimensions would help out too
Especially where the "shifter" area is in relation to the dash
both with and without a cup holder option
Some of us running a T56, have a LS1/ F-body shifter location, and some are running a T56 Magnum, with shifter location is different
Thanks, Jeff
This is our new dash with our Gen II console, dry fit and ready for the upholstery shop. The dash and console will be covered in black vinyl. The gauge panel, vent bezels and 4 speed shifter plate will be hi gloss carbon fiber.
The A pillars and vent bezels will be installed at the upholstery shop.
http://www.lateral-g.net/forums/attachment.php4?attachmentid=40165&stc=1&d=1371995266
Mike
MCI
[email protected]
260-602-7651
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.