Brian made a patch and we gained about a 1/4".

http://img.photobucket.com/albums/v3...ps7b87035c.jpg

http://img.photobucket.com/albums/v3...ps3723b624.jpg

http://img.photobucket.com/albums/v3...ps23bc4bf7.jpg

Flickr...

Once it warms up the Fairlane is ready for two coats of SPI white epoxy and than SPI red base coat.

http://img.photobucket.com/albums/v3...ps1a45a673.jpg

Rusty this car is going to be bad azz I love it!!!

I removed the Opentracker suspension to make it easier to tape the undercarriage.

http://img.photobucket.com/albums/v3...ps98a87b0a.jpg

I also wanted to install the adjustable strut rods that came in yesterday

http://img.photobucket.com/albums/v3...psed631982.jpg

The stock fuel tank will be replaced with a 5 gal fuel cell so we needed to fabricated a trunk floor. Brian added a couple of braces using small box tubing

http://img.photobucket.com/albums/v3...ps08137592.jpg

He cut out a piece of sheetmetal drilled and marked the attachment holes and than sanded it with 80 grit.

http://img.photobucket.com/albums/v3...ps7d3b1355.jpg

I sprayed 2 coats of SPI black epoxy

http://img.photobucket.com/albums/v3...psd7cc3d37.jpg

Brian used a little seam sealer than screwed it together.

http://img.photobucket.com/albums/v3...psb8e9afbb.jpg

Brian taping the body getting ready for SPI white epoxy

http://img.photobucket.com/albums/v3...ps204fb602.jpg

http://img.photobucket.com/albums/v3...ps361d47a9.jpg

http://img.photobucket.com/albums/v3...psd814fc4e.jpg

http://img.photobucket.com/albums/v3...psfcd3d126.jpg

http://img.photobucket.com/albums/v3...ps499e507d.jpg

http://img.photobucket.com/albums/v3...pscd77a041.jpg

http://img.photobucket.com/albums/v3...psef4e19ff.jpg

http://img.photobucket.com/albums/v3...ps92d17ba7.jpg

nice job. great build so far.

That's a very cool build and great work so far.