If I am not mistaken, and may speak for Scott here, a 12" coilover is used. QA1, Strange, AFCO all make single or double adjustable coilovers that work great with this setup. I believe with Scott's setup we ran a 12" on our 69 Camaros. Scotts subframe comes with a upper coilover mount welded in and a lower that is used with the lower vette control arm can be made by Scott as well (not sure if it comes with the setup). Coilover bolts right in and shouldnt need to be modified. Hope I am not stepping on his toes here.

FYI/I use a 14.250 extended length coil over w/std. welded upper shock mount.If you have ordered the sub frame w/the optional ajustable upper shock mount you need to buy a coil over w/15.250 extended length.

was at the shop earlier today...14" was used, oops. Thanks for correcting me Scott.

Chris,I will weld your shock bracket's togather in the morning if you want to come by and pick them up.Will be gone during lunch hour.Scott

Wanted to show my nice piece!!! aint it pretty!!!

http://i1191.photobucket.com/albums/...ve6869/065.jpg

how much is shipping to san jose 95127 thanks

Beautiful work Scott

Couple questions,What width wheel are we running on 68-74 X-Bodys? Backspace? Does this allow for any additional ground clearance?:hail:

Thanks

DW

Shipping cost is going to around $260.00.

You could run 18x10 w/ 7.25 back space